Major Benefits Of Cerakote Coating On Glocks And Firearms

Major Benefits Of Cerakote Coating On Glocks And Firearms
February 27 12:30 2017 Print This Article

Cerakote is a polymer mixed ceramic coating applied to metals, wood, composites,fiberglass, and polymers. The firearm coating was introduced in 1984, and it is considered to be one of the toughest and long lasting products suitable for a firearm. The coating is a ceramic based spray like paint applied to the gun, then baked in thelow-temperature oven.

The coating produces a durable protective layer over the gun, which will over last for years. The main reason to apply cerakote on a gun is to prevent the firearm from rusting. About 90 different Cerakote colors are available, and you can mix different colors to create custom colors.

Reason to Apply Cerakote Coatings on Firearms

Nowadays, everyone has this coating on their guns. Gun coatings are considered to be a fun way to personalize your firearm. They can add bulk to loose tolerances. For some people, gun coatings are a cosmetic enhancement.

Special coating colors are good to show the signature for military or any special law enforcement and special operation. They are functional, and they provide lots of benefits over bare metal.

Benefits of Using Cerakote Coatings

The best way to take care of firearms is to clean them. Sometimes, we will be required to purchase cleaning agents to keep firearms in good condition.

As a rifle owner, the best thing you can put on your gun is cerakote, or you may buy Cerakote glocks. This type of coating is recommended for pistols.

  • Keeps your gun rust free and scratch resistant – Ifyou want to avoid getting rust on your rifle, you may use this coating. After applying the paint, your gun will remain free from scratch. It will make your gun look clean, fresh and new.
  • Spend fewer amounts on maintenance –To take care of rifle and pistol, you will be required to spend money on maintenance. You must spend time putting oil into the metal parts to get rid of rust. Even water can cause corrosion and later build rust on the metal part of the gun. This could lead to complications when you shoot. To get rid of such issues, better apply the coatings on the gun.
  • High-end metal protection –Cerakote is a proven state of art metal protection specifically designed for firearms.
  • The coatings can hold agood amount of oil –The Parkerizing coating is a process of coating that can hold much oil. You can use ordinary paints, but Cerakote is very sensitive to chemicals. This coating can dissolve oil very fast.
  • The coating consists of hard ceramic material –Many people think the coating only paints and nothing more. But the coating has a base element that consists of hard ceramic materials. Strong chemicals cannot destroy the ceramic alone.
  • They can withstand tough weather condition –They are good enough to resist any dirt, acidic elements, and bad weather condition. The thin film coating is rust proof, scratch-resistant, solvent resistant and self- lubricating.

Usually, it takes 6 to 8 days for a gun to be cerakoted. If you want to get protect your rifle from the elements, you should consider using cerakote.

view more articles

About Article Author

write a comment


No Comments Yet!

You can be the one to start a conversation.

Add a Comment

Your data will be safe! Your e-mail address will not be published. Also other data will not be shared with third person.
All fields are required.